Category
Geomax Geocell for Road Construction, Slope Protection, Soil Retention, Retaining Walls, Channel Protection
GeoMax® Geocell Geomax® Geocell is a lightweight and flexible three-dimensional, expandable panels made from High-Densit
Basic Info
Model NO. | GeoMax Geocell |
Certification | CE, ISO |
Peeling Strength | 10kn/M, 14.2kn/M, 16.5kn/M, 20kn/M |
Surface | Smooth/Textured |
Hole Size | 10mm |
Welding Spacing | 300mm - 2000mm |
Transport Package | Packed on Pallets |
Specification | ASTM/GB |
Trademark | GeoMax |
Origin | Anhui, China |
HS Code | 3926909090 |
Production Capacity | 35, 000m2 Per Day |
Product Description
GeoMax® GeocellGeomax® Geocell is a lightweight and flexible three-dimensional, expandable panels made from High-Density Polyethylene (HDPE) strips which are ultrasonically bonded together to form an extremely strong configuration.Geomax Geocell System can be filled with a wide range of material: aggregate, concrete, sand, soil, etc.
More colour can be customized, even different colour on both side. (Green, Turquoise, Tan, Yellow, Sand)
GeoMax® Strengths
1. Advanced Ultrasonic Welding Machine
GeoMax® geocell used the most advanced ultrasonic welding equipment in China, which our company are involved in research and development, the compliance rate of seam peeling strength is up to 100%.
Our company has 9 geocell production line, the daily output of the geocell excceds 35,000m2.
2. Advanced Inspection Equipment
Our company is specialized in geocell for over 20 years, as a leading manufacturer in China, our company has strong product development capacity, advanced production technology and equipment, the products can meet the standards of superb quality and diversification.
Our company has complete sets of production equipment, advanced detection equipment and strong technical force, and established long-term cooperative relations with colleages and universities.
3. Completed Inspection SystemIn the production process, each procedure has a strict inspection by the person responsible to ensure that the probability of error will be minimized in terms of to provide a satisfactorys services to our customers.- 100% virgin material will be used for the production if no special requiments from customers.- The process record and test form should be filled by the inspector within every 2 hours during the plate production.- Inpecfect sheet need to be picked individually and handle in time after slitting.
- Our new generation ulstronic welding requipment has automatic alarm system can make sure the compliance rate of seam peel strength is absolutely 100%.- All the geocell must be fully expanded for manually inspection to ensure that each grid and weld meets the customer requirements.
Specification
Section Properties | Unit | - | GM330 | GM356 | GM400 | GM445 | GM500 | GM660 | GM712 | GM1000 |
Welding Spacing | mm | - | 300 | 356 | 400 | 445 | 500 | 660 | 712 | 1000 |
Cell Depth | mm | - | 50, 75, 100, 125, 150, 200, 300 | |||||||
Index Properties | Unit | Test Method | Value | |||||||
Polymer | - | - | HDPE | |||||||
Density | g/cm3 | ASTM D 1505 | ≥0.94 | |||||||
Carbon Black Content | % | ASTM D 1603 | ≥1.5 | |||||||
ESCR | hrs | ASTM D 1693 | ≥6000 | |||||||
Tensile Strength | kN/m | ASTM d 638 | ≥25 | |||||||
Seam Peel Strength | N | US ACE GL-86-19 | ≥1600 | |||||||
Perforations | Polyethylene strip is perforated with horizontal rows of maximum 10mm diameter holes. Cell perforations area is less than 12% of cell surface area |
Applications:
1. Used for the stability of railway roadbed.
2. To stabilize the desert highway roadbed.
3. Used in the governace of shallow water channel.
4. Used for the foundation feinforcement of retaining wall.wharf,and levee. 5. For the management of desert,beaches and river banks.
Packaging and Shipping
1. Finished strips laid on the fumigated special sized pallet.
2. Strengthen them with green bands, wrapped with stretch films.
3. Labels will be shown on each pieces, and outside the pallet with a label.
4. Water proof clothes can be reqired in terms of protecting the whole package and products.
Our Services
· The sample is free.
· The quality of our products are qualified.
· Our delivery speed will be the fastest.
· We can provide the most professinal technical guidance and service.
FAQ
1. How about the delivery time?
Lead time: 1-3 weeks on receipt of 30% T/T deposit.
2. What's are the MOQ?
We can according to your condition to set the MOQ.
And we can provide you samples for quality inspection.
3. How to deal with the sample charge?
Samples are free, and we only charge the freight. We will return the sample freight in the furture order.
4. Can you produce the product according to customers' requirements?
Sure, we are professional manufacturer, OEM and ODM are both welcome.
Sincerely Welcome You to Visit Us!